Learn

What is a predictive dialer? Pacing, the 3% rule and AI agents

A predictive dialer dials ahead of your agents, betting on how many people will pick up. The bet pays with big teams and long lists, the FTC caps how often it can lose, and most of it stops mattering once an AI agent takes the connected calls.

7 min read

  • Zach KamranCo-Founder & CTO
In this guide

A predictive dialer is outbound calling software that dials more numbers than you have free agents. From live statistics, it predicts how many calls will be answered and when each agent will finish their current conversation, then connects each person who picks up to whoever is free. Voicemail, busy signals and unanswered rings never reach an agent.

The reason it exists is that most outbound dials don’t reach a person. A rep dialing one number at a time spends much of the hour listening to rings and greetings. A predictive dialer hands that waiting to software. In exchange it takes a risk on every call, since sometimes more people answer than there are agents free to talk.

How pacing works

Pacing is the dialer’s running decision about how many lines to dial per agent. It recalculates from the campaign’s current answer rate, the average handle time (which tells it when agents on calls will be free), how many agents are ready now, and the abandonment rate it has to stay under.

Say one dial in five reaches a person and four agents will be free in the next few seconds. The dialer might place around twenty calls. If the answer rate climbs after lunch, it slows down. If it overshoots and someone answers with no agent free, that call is abandoned. Every predictive dialer is trading idle agents when it dials too slowly against silent calls when it dials too fast.

Predictive, progressive, power and preview dialing

“Outbound dialer” is the general term for software that places calls from a list for a team, and most contact center platforms offer several modes. Vendors use the names a little differently. These are the common definitions.

ModeHow it dialsGood forTrade-off
PreviewShows the agent the record and lets them decide when to dialComplex or high-value calls that need preparationSlowest, because agents wait through every ring
ProgressiveDials one number as soon as an agent is freeSteady campaigns where an abandoned call is unacceptableNever abandons, but agents still hear every ring
PowerDials a fixed number of lines per free agentLists with a known, stable answer rateAbandons calls whenever more people answer than expected
PredictiveVaries the lines per agent from live statisticsLarge teams working large listsNeeds volume to predict well, and must hold abandonment under the limit

Predictive pacing needs volume because its forecasts are statistics. With a handful of reps the numbers are too noisy to trust, and progressive dialing is usually the safer mode.

The abandoned-call rule

In the US, the FTC’s Telemarketing Sales Rule counts a call as abandoned when a person answers and isn’t connected to a sales representative within two seconds of finishing their greeting. A telemarketer stays inside the rule’s safe harbor only if it:

  • abandons no more than 3% of calls answered by a person, per campaign, measured over 30 days;
  • lets an unanswered call ring for at least 15 seconds or four rings before hanging up;
  • plays a recorded message within two seconds when no rep is free, giving the seller’s name and phone number;
  • keeps records that show it met these conditions.

The FCC sets a similar 3% limit for telemarketing calls under the TCPA, on top of its consent rules. Abandoned calls also cost you outside the law. Someone who says “hello?” into silence learns to ignore your number, and carriers’ spam labels follow numbers that generate short, dead calls. This isn’t legal advice; check your program with counsel.

Answering machine detection and its cost

Most predictive dialers screen out voicemail with answering machine detection (AMD). It listens to the first moments after pickup. A person tends to say a short “hello?” and wait, while a voicemail greeting talks for several seconds.

AMD has to listen for a second or two before it decides, so the person who answered hears silence first. That pause is how people recognize a dialer call, and many hang up during it. AMD also misclassifies in both directions. Someone who answers “Hello, this is Dana speaking” can be dropped as a machine, while a voicemail with a two-word greeting gets put through to an agent. Teams tune it per campaign, trading lost conversations against wasted agent time, and there’s no setting that avoids both kinds of error.

What changes when an AI agent takes the call

Pacing, the abandonment limit and the AMD pause all exist because the dialer is trying to fill the time of a fixed number of human agents.

An AI voice agent removes that constraint. It holds as many conversations as you choose to run, so every person who answers is greeted straight away. Nothing has to be dialed ahead of a free agent, so nothing has to be predicted, and the main cause of abandoned calls is gone. What’s left for the dialer is deciding who to call, when, how often and from which number.

Those decisions now carry the weight. With unlimited conversations, the limits you set are all that protects customers. They include calling hours in each contact’s time zone, a cap on calls per person per day and per month, and stopping the moment someone books or opts out. An AI voice also needs the called person’s prior express consent under the TCPA. The guide to AI outbound calling covers that.

Two ways to put an AI agent on outbound calls

Behind the dialer you already run

Your contact center’s dialer keeps pacing, Do Not Call checks and answering machine detection, and transfers each connected call to the AI agent over SIP instead of to a rep’s queue. Campaigns, lists and reports stay where they are. If your compliance process is built around Five9, NICE CXone Personal Connection, Genesys or Amazon Connect, this is the quickest route.

The agent places the call itself

The AI platform dials directly, through your SIP trunk with your caller ID or through its own numbers. With no transfer in the path, the person hears the agent as soon as they answer, without the telltale dialer pause. This suits event-driven calls, such as a new web lead, a callback someone asked for or a reminder before an appointment, better than bulk lists.

Plenty of teams run both, keeping the existing dialer for list campaigns and calling directly for anything time-sensitive.

Where Simple fits

Simple connects to Five9, NICE, Genesys, Talkdesk, Amazon Connect, RingCentral, Avaya and any other platform that supports SIP. Behind your dialer, it takes the connected calls and can transfer back to a specific queue, skill or agent. The conversation’s context travels in the SIP headers, so the rep’s screen pop and CRM record are filled in before they say hello.

For calls Simple places itself, Journeys sets the timing, calling hours, contact limits and local caller ID for each contact, and stops when the goal is met. Book covers the rest of the follow-up, from the first callback to the booked appointment.

Frequently asked questions

What is a predictive dialer?

Outbound calling software that dials more numbers than there are free agents. It uses live answer rates and handle times to predict when agents will be ready, and passes on only the calls a person answers.

What’s the difference between a predictive and a progressive dialer?

A progressive dialer places one call per free agent, so it never abandons a call, but agents hear every ring. A predictive dialer dials ahead of agents to cut that waiting, and accepts some risk of abandoned calls.

What is an acceptable abandonment rate for a predictive dialer?

The FTC’s Telemarketing Sales Rule safe harbor allows at most 3% of calls answered by a person, per campaign over 30 days, and requires a recorded message naming the seller when no rep is free within two seconds.

Is a predictive dialer the same as an auto dialer?

It’s one kind. “Auto dialer” covers any software that places calls without someone keying in each number, which includes power and progressive dialers too.

Can an AI voice agent work with my existing dialer?

Yes. The dialer keeps pacing, Do Not Call checks and answering machine detection, then transfers each connected call to the agent over SIP. The agent can send the call back to your queues when a person is needed.

Hear a voice agent handle a real call